14
Connecting Outputs.
Speakers are connected using terminal connectors. See the examples below and following page.
Low impedance outputs
You can use as many speakers as you want as long as the total impedance matches the amplifiers
output.
Example 1:
using the 4
Ω
output with two 8
Ω
speakers.
Fig. 5
Example 2:
using the 4
Ω
output with four 4
Ω
speakers
Fig. 6
Example 3:
using the 8
Ω
output with two 4
Ω
speakers.
Fig. 7
In a low impedance system, the total speakerload should always match the amplifier
impedance This to avoid overloading the amplifier.
The total speaker power should be at least the power of the amplifier to avoid damage to the
speakers.
High impedance outputs
If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.
The total power of all speakers summed together should never exceed the total power of the
amplifier in a 70V or a 100V system!
Summary of Contents for ZA-240VTU
Page 19: ...2013 DapAudio...
