10
39. Zone output terminals
Each zone has it’s own output terminal. Each zone can be activated or deactivated by pushing the
corresponding
zone (4)
buttons. Connect this terminal to the + terminal of your your high impedance
(100V) speaker.
The total power rating of the high impedance speakers connected to all zones summed together, should
never exceed 240W.
40. FM Antenna connector
Connect your FM antenna to this connector.
41. AM Antenna connector
Connect your AM antenna to this connector.
42.
GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
43. DC 24V 20A terminal
DC 24V input (battery).
44. Common speaker terminal
Connect this terminal with the – terminal of your speaker(s).
45. Low impedance speaker terminals
Connect this terminal to the + terminal of either a 4
Ω
or 8
Ω
speakerload.
In case of using several speakers,
make sure that the total speaker load is is the same as the impedance
of the corresponding terminal. The total power rating of the low impedance speakers connected to this
terminal summed, should be at least 240W.
46. High impedance terminals
Connect this terminal to the + terminal of either a 70V or 100V of your high impedance speaker load.
In case of using several speakers make sure all speakers are wired in parallel.
The total power rating of the 100V-speakers connected to this terminal summed, should never exceed
240W.
47. Aux out
RCA stereo line level output for connecting a recording device or another amplifier.
48.
Line input 2
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
49.
Line input 1
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
50. Mic input 3
Mic level balanced XLR input for channel 2.
51. Mic input 2
Mic level balanced XLR input for channel 1.
Summary of Contents for ZA-240VTU
Page 19: ...2013 DapAudio...
