7
ONLINE MODE
1. Connect the amplifier to the PC with the right cable. Insert one end of the cable into the parallel port of
the
PC and the other end into the PC REMOTE port in the front panel of amplifier.
Start DSP testing software.
2. CONNECTION
Click the Debug button and then click Connect. Select a device number (1-255). If this number is the
same as the amplifier ID, the LCD shows:
CONNECT SUCCESSFUL
PC CONTROL DEVICE
At that time, the system can be tested by the DSP software. All the functions from the offline mode are not valid.
3. DISCONNECT
Click Debug button and then click Disconnect, the LCD shows:
CONNECT CANCEL
MCU CONTROL DEVICE
Then the software testing is not valid. The system returns to the offline mode.
Regarding the operation of DSP software, please refer to the online help of it.
Fig. 3
Summary of Contents for Xtreme X-1300
Page 1: ...Xtreme X 1300 ORDERCODE D4172...
Page 15: ...2004 DapAudio...
