5
Backside
Fig. 2
1. Balanced input (0 dB / 30 KOhm): CH A and CH B have one pair of balanced inputs with a cannon
connector.
2. Power output: output should be connected to the loudspeaker. The CH A/CH B outputs of a DSP series
amplifier have one waterproof jack and one group of binding post.
Note: The rated power and the impedance load of the loudspeaker or loudspeaker system must match the
amplifier (see technical specification), Only use a speaker cable (normally provided with one red
and one black wire). Do not use the signal cable (normally used for microphone and audio
equipment).
3. Earthed ON/FLOATING: Separate the signal earth from the chassis.
Use this selector to stop earth loops, which can occur when several units are connected.
4. Power: AC 200-240V+ 1 0% 50-60HZ.
5. Air vents
Don't obstruct or insert objects into air vents.
Summary of Contents for Xtreme X-1300
Page 1: ...Xtreme X 1300 ORDERCODE D4172...
Page 15: ...2004 DapAudio...
