4
Description of the device
Features
The Xtreme X-700, X-900, X-1300, X-2000, X-2400 are professional high-end amplifiers :
• Integrated system
• Perfect electronic protections: short circuit/overload protection, overheating Protection and direct current
excursion protection.
• Network control
• Power supply
X-700
: RMS 2 X 750W(4
), RMS 2 X 430W(8
)
X-900
: RMS 2 X 870W(4
), RMS 2 X 520W(8
)
X-1300
: RMS 2 X 1050W[4
), RMS 2 X 720W(8
)
X-2000
: RMS 2 X 1520W[4
), RMS 2 X 1020W(8
)
X-2400
: RMS 2 X 1760W[4
), RMS 2 X 1250W[8
)
• Built-in 48-bit DSP processor and dynamic range up to 116 dB, 48kHz sampling rate A/D, D/A
• Low noise and lower distortion
• Well-designed signal generator: sin wave and white noise
• S/PDIF input/output (option)
• Matrix control, up to 255 units controlled by selecting address code
• Save and recall all parameters via PC parallel port
• 5 band PEQ, limiter threshold, attack time and release time adjusted), delay (max 8ms), phase invert, input
gain control
• Two crossover: range, 20Hz-20kHz. Crossover frequency adjusted. Slope: -6, -12, -18 and -24dB
butterworth
• Three output modes: stereo, mono and bridge
• THD+N: 0,08%@ I kHz
• Frequency response: 20Hz-20kHz
• 2 x 20 LCD display with backlit
Overview
Fig. 1
1. CH A: Adjust the volume of channel A / Set up amplifier ID device nr1-255 / Noise Gate ON/OFF
2. CH B: Adjust the volume of channel B / Load Program 1-11 / Auto Mute ON/OFF
3. Input interface to PC
4. Output interface to PC
5. 2 x 20 LCD Display with backlit
6. Power ON/OFF
Summary of Contents for Xtreme X-1300
Page 1: ...Xtreme X 1300 ORDERCODE D4172...
Page 15: ...2004 DapAudio...
