DAPAudio IMIX-7.3, Manual

Page: 11 / 16

10
IMIX 7.3
Ordercode: D2351
32. Power adapter connector
This is the remote AC power supply input socket for the IMIX-7.3. It is a special three core socket. Please
use the supplied DAP audio adapter only.
33. Power on/off switch
Do not supply power before the whole system is set up and connected properly.
34. With/without mic switch
Use this switch if you don’t want your microphone signal at the record (47) outputs.
35. Master 3 level switch
This selector allows you, to set the output level (0,75V or 1,5V) for the Master 3 outputs.
36. Master 2 level switch
This selector allows you, to set the output level (0,75V or 1,5V) for the Master 2 outputs.
37. Master 1 level switch
This selector allows you, to set the output level (0,75V or 1,5V) for the Master 1 outputs.
38. Channel 5 gain control
Channel 5 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
39. Channel 4 gain control
Channel 4 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
40. Channel 3 gain control
Channel 3 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
41. Channel 2 gain control
Channel 2 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.
42. Channel 1 gain control
Channel 1 input level is determined by the gain control. With the gain control you can adjust the line
input-sensitivity, while optimally matching the incoming signals to the mixer’s internal operation level. The
high gain of this mixer is ideal when dealing with very low input levels.