5
Set Up and Operation
Before opating the unit make sure the batteries are inserted.
Receiver Battery Installation
Fig. 2
Press the battery compartment door
Install the batteries.
And slide the cover in the direction
As shown in Figure 2.
Receiver control
Audio Left/ Right Control.
Rotate the Audio Control knob for adjusting the balance between Audio Left/ Right or Channel
1/2. In Mid position the Audio Left and Right are set to the same volume level.
Fig. 3
On/Off/Volume Control.
Rotate the On/Off/Volume knob to adjust the volume.
Frequency/ Channel Setting.
Press the up or down button until the Frequency/ Channel starts flashing, you’re now in the setting
state.
a.Press the
SET
button to switch between Frequency and Channel.
b.Use the
up
/
down
buttons to set the desired Frequency/ Channel.
Fig. 4
Summary of Contents for IEM-100 Beltpack
Page 1: ...IEM 100 Beltpack ORDERCODE D147173 D147182 ...
Page 17: ...2010 Dap Audio ...
