DAPAudio DSM-26, User Manual

Page: 7 / 29

5
Description of the device
Features
The DSM-26 is a 2 in- and 6 output speaker manager that can be used for a wide range of applications.
At the front it has an USB connection port which enables you to program the DSM-26 with the included
software. The RS485 interface gives you the possibility to connect and program multiple units at once. It
has a powerful chipset that makes it possible to use all filter slopes up to 48 dB per octave and all
equalizer, delay sections without running out of memory. The DSM-26 is suitable for professional PA
systems, line arrays and audio installations, as well as sound distribution networks.
• DAP speaker presets available at www.dap-audio.info
• 96 Khz Sample rate, 115 dB dynamic range
• Noise floor better than -95 dBu
• USB at front with included user-friendly remote software
• Connect multiple units with RS485 (use optional interface D2071)
Overview
1)
Input LED ind mute switches
Indicates the input level. Make sure the Clip led only lights up occasionally.
Pressing the mute/ edit button shortly will mute the corresponding input.
Pressing and holding the mute/ edit button lets you enter the edit mode for the corresponding
channel. In edit mode you can adjust the polarity, delay and EQ for each input separately by
pressing the
Polarity(12) , Delay(8) or EQ(3) button.
2)
Gain button
Pressing the Gain button allows you to enter the Gain menu directly. The gain can be setup for each
output separately. You can’t adjust the gain for the input channels.
3)
EQ button
Pressing the EQ button allows you to enter the EQ menu directly. You can setup 6 different EQ’s for
each input and each output.
4)
X-over button
Pressing the X-over button allows you to enter the X-over menu directly. Pressing the X-over button
let’s you select and adjust a high- and low- pass filter for each output.
5)
Limiter button
Pressing the Limiter button allows you to enter the Limiter menu directly. You can set up a limiter for
each output.
6) LCD display
To display functions and operating status.
7)
Jog-wheel
Turning the Jog Wheel allows you to change parameters.
Pressing the Jog Wheel allows you to enter or confirm.
8)
Delay button
Pressing the Delay button allows you to enter the Delay menu directly. The delay for each input
and output can be adjusted separately.