DAPAudio DSM-26, User Manual, Page: 12 / 29

10
1. Device ID Setup
Allows you to change the device ID. For more info see page 15.
2. Password Setup
Press the
Jog Wheel(7)
Select a character by turning the
Jog Wheel(7) , confirm the character. Repeat this procedure for the
next character etc. Make sure to write down your password.
3. Power On Setup
You can choose between keep state and all mute. “Keep state” will switch all inputs and outputs the
way they are programmed. “All mute” will mute all inputs and outputs when changing a program. This to
prevent your speakers and audience from annoying or even dangerous sudden signal bursts.
4.Backlight Setup
You can choose between open and 10s. 10s will switch off the backlight is there is no key pressed for 10s.
Open means that the display backlight is always on.
5. Current Program
Shows the current program name.
<password setup>
Lock panel
<power on setup>
Keep state
<backlight setup>
open
Current program name
arena
Speaker processor
V2.3
<input password>
A