DAPAudio DSM-26, User Manual, Page: 20 / 29

18
Software operation
The Digital Speaker Management window can be divided into 3 zones:
A. The information zone
B. The display and connections zone
C. The parameter adjustment zone
A. The information zone
The information zone displays the software version number.
B. The display and connection zone
1. DAP logo
2. Input buttons
allows you to open or close the corresponding input curves.
3. Connection display
The connection button can be used to setup or change a connection. For more information, see page
16. The box under the connection button shows the progress of the connection setup. The device
number of the connected DSM-26 is shown in the box under “Device Id”.
4. Program name
This field shows the name of the program in the upper row and the number of the preset in the bottom
row. The first time you run the Digital Speaker Management software, the “Name” row will be blank and
the “NO.” row will show “default”. And the Digital Speaker Management software will be set to
default settings.
After the first setup, the Digital Management Software will load the settings of the program which is in the
DSM-26’s working memory while connecting. The display will show “working”.
After storing and naming a program, the name of the program will be shown in the upper row and the
number of the program will be shown in the bottom row.
5. Display
Displays the curves of the input and output channels. It is also possible to edit curves by clicking and
drawing the curve.
6. Output buttons
Allow you to open or close the corresponding output curves.
7. Function buttons
Help
Click to open the help function.