14
DCP-26
Productcode: D2084
Switch the currently selected parametric EQ on or off by dialing the jogwheel. Click the jogwheel to
confirm and proceed to the next parameter. Or push the
item up button (2)
to proceed with the next
item. In our case PEQ 2
Adjust the PEQ 2 parameters in the same way as described for PEQ 1. When finished, pushing the
item up
(2)
button
let’s you adjust the PEQ 3, PEQ 4, and PEQ 5 parameters.
Pushing the
item up (2)
button after PEQ 5 is selected, allows you to adjust the limiter parameters for
input A.
Adjust the limiter threshold by dialing the
jogwheel
(8)
. Click the
jogwheel
(8)
to proceed with the next
parameter.
Adjust the limiter release time by dialing the
jogwheel
(8)
. Push the
item up (2)
button to proceed with
the next item.
IMPORTANT!
Enabling the limiter on a specific output also changes the way in which the level is displayed on the
corresponding LED VU meter: The level shown on this meter is no longer the “absolute” output level, but
the level of the signal at -24dB, -12dB, -6dB, -3dB compared to the limiter’s threshold (orange limit LED),
no matter what the threshold value is.
Select normal or inverted phase by dialing the
jogwheel
(8)
. Push the
item up (2)
button to proceed with
the next item.
Out 1 peq 1
type: BES 24db
Out 1 Peq 2
freq: 20hz
Out 1 Limiter
Thr.: 0dbu
Out 1 Limiter
rel.: 50
Out 1 phase:
normal
Summary of Contents for DCP-26
Page 35: ...34 DCP 26 Productcode D2084 Notes...
Page 36: ...2013 DAP Audio...
