12
DCP-26
Productcode: D2084
Output setup
Select output 1 by pushing the
Channel Up (3)
button or the
Channel Down (4)
button. If you are only
able to select Out 12, Out 34 and Out 56, all 6 channels are linked (in pairs). If you want to adjust all 6
output channels separately, you’ll have to unlink the channels (see page 12).
Adjust the gain by dialling the
jogwheel
(8)
. Pushing the
item Up (2)
button allows you to proceed with
the next item, in our example the mixer.
Adjust the mix volume for input A by dialling the
jogwheel
(8)
. Pushing the
item Up (2)
button allows you
to proceed with the mixer menu. Note: the mixer menu is only enabled if the input channels are not
linked.
Adjust the mix volume for input B by dialling the
jogwheel
(8)
. Push the
item Up (2)
button to proceed
with the Delay setup.
Click the
jogwheel (8)
to adjust the “delay” in mm, inch or ms. Then adjust the delay time by dialling the
jogwheel
(8)
. Push the
item Up (2)
button to proceed with the Low Pass filter menu.
Out 1 gain
-1.25db
Out 1 mixer:
Input A: odb
Out 1 mixer:
Input b: off
Out 1 delay
0mm
Out 1 lowPass
Freq: off
Summary of Contents for DCP-26
Page 35: ...34 DCP 26 Productcode D2084 Notes...
Page 36: ...2013 DAP Audio...
