12
30. Right aux return jack
Connect this input to the right output of a connected effect device.
31. Aux send jack
Connect this output to the input of your effect device.
32. Stereo out L/R jacks
Connect a powered monitor or external amplifier to this output.
33. Tape in stereo RCA
RCA Input, connect the output of your recording device to this input.
34. Rec out stereo RCA
RCA Output, connect the input of your recording device to this input.
35. Control room out L/R jacks
Connect a powered monitor or external amplifier to this output.
36. Phone out
You can connect a pair of headphones with a minimum impedance of 32 Ohm to this stereo
1
/4” jack
should be wired as Tip=left, Ring=right and sleeve=ground.
Caution:
Depending on the type of headphones connected to the phones jack, the Powermix is
capable of producing very high output levels on the headphones output. Therefore, make sure to turn
the control all the way down (minimum setting) before connecting the headphones.
Listening to loud sound pressure levels over a longer period of time leads to hearing damage!
37.
Remote Power Supply Input Socket
This is the remote AC power supply input socket for the Sessionmix 6. It is a special three core socket.
Please use the supplied DAP audio adapter only.
38.
USB slot
The USB Slot can be used to connect the GIG-6 to your PC/ laptop. You can use this connector for
playback or recording with suitable software installed. Make sure the length of the USB cable does not
exceed 3m.
39. Power On/Off
Do not supply power before the whole system is set up and connected properly.
Summary of Contents for D2260
Page 1: ...GIG 6 ORDERCODE D2260...
Page 18: ...16 Appendix 1 GIG 6 block diagram...
Page 19: ...2011 Dap Audio...
