DAPAudio D2260, User Manual

Page: 13 / 19

11
19. Level
This control allows you to adjust the echo level in the main mix.
20. Aux send
This control controls the level of the aux send (31) output.
21. Display FX program
The display indicates the selected effect program number.
22. Effect preset up
Pressing this button increases the effect preset number (0-F).
23. Effect preset down
Pressing this button decreases the effect preset number (0-F).
24. Phones/ Control room
This control allows you to adjust the control room/phones output
volume.
25. Power LED
The red power LED lights when the GIG-6 is turned on. If after
switching the device on, the LED does not light, make sure that the
AC adapter is connected properly. If the LED still doesn’t light up
after everything is connected right, please contact your DAP audio
dealer.
26. Phantom Power LED
This LED indicates when the phantom power is switched on for the
mic (1) inputs. After switching on the mixer, the red LED should not
light up. So both balanced and unbalanced microphones can be
connected. Unbalanced microphones may be damaged if the
Phantom power is activated however unbalanced microphones
are rarely to be found these days.
27. LED VU meter
28. Master mix
This control allows you to adjust the main mix level.
29. Left/mono aux return jack
Connect this input with the Left output of a connected effect device. In case the effect device only has
a mono output, use this return input.