DAPAudio CORE KONTROL D1, Manual

Page: 24 / 32

Ordercode: D1265
Core Kontrol D1
Maintenance
The DAP Audio Core Kontrol D1 requires almost no maintenance. However, you should keep the unit
clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
Problem Probable cause(s) Remedy
Controller is
not recognized
by Windows.
No driver installed. 01) Unplug all other USB cables and devices.
02) Plug in your controller’s USB cable.
03) Check if your driver (ME 702SC) is installed and running.
Windows Vista & Windows 7:
Start/Devices and Printers/.
Windows XP:
Start/Control Panel/System/Device Manager/.
04) Reinstall the driver if necessary.
No sound from
controller
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19: Running the Virtual DJ-software for the first
time.
No sound from
the controllers
headphones
output.
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19: Running the Virtual DJ-software for the
first time.
No access to
the controller’s
built-in
soundcards
during setup.
Controller is not
connected to your
PC’s USB port or is
switched off.
01) Check if your controller is switched on.
02) Check if the controller is connected to your PC
03) Check your USB cable.
Sound from
controller
despite all
faders being
set to
minimum.
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19: Running the Virtual DJ-software for the
first time.
23