DAPAudio CORE KONTROL D1, Manual

Page: 15 / 32

Ordercode: D1265
Core Kontrol D1
Setting a hot cue point in pause mode
• Push the play/smart play (21) button to stop playback.
• The play indicator flashes when the pause mode is set.
• Turn the jogwheel (07) to go to the desired Cue point.
• Push the desired hot cue (1 (03), 2 (02), 3 (15), 4 (16)) button and your hot cue point will be stored
while playback resumes.
• The stored hot cue point will be indicated in the Waveform display as shown in figure 9 below.
Setting a hot cue point in play mode
• During play mode, push the desired hot cue (1 (03), 2 (02), 3 (15), 4 (16)) button. Make sure that you
use a hot cue button which is not lit.
• The hot cue point is stored while playback resumes.
• The hot cue point will be indicated in the waveform display as shown in figure 9.
(Hot) Cue Points Fig. 09
Deleting a hot cue point
• Push and hold the shift (29) button while tapping the corresponding hot cue button (1 (03), 2 (02), 3
(15), 4 (16)) to delete a hotcue point.
Cueing
• "Cueing" is the action of preparing for playback.
• Push the cue/smart cue (08) button, the player will enter cue mode. Playback returns to the cue
point and the deck will enter pause mode and the cue (08) button lights up. When the play/ smart
play (21) button is pushed, playback will start from the cue point.
• If the cue/smart cue (08) button is pushed after the searching operation or the scanning operation,
playback returns to the cue point and the deck will enter pause mode.
Seek (fast forward/fast backward)
• Seeking is a function for quickly moving forwards or backwards through a track while pushing and
holding the shift (29) button and turning the jogwheel (07).
• Push and hold the shift (29) button while turning the jogwheel. The track will play fast forward or fast
backward and the sound is audible.
• Turn the jogwheel clockwise to scan in forward direction, counterclockwise to scan in reverse
direction.
Changing pitch of a song
• Set the desired pitch bend range for the pitch control fader (04) by pushing and holding the shift (29)
button and tapping the key lock/pitch (19) button. Make sure that the pitch control fader (04) is not
locked (the lock symbol should be white).
• Adjust the BPM by sliding the pitch control fader (04) control up or down.
• Slide the pitch control fader (04) fader up to decrease BPM, or down to increase BPM. The
adjustment range is +/- 6%, 8%, 10%, 12%, 25%, 33%, 50% or 100% depending on the range previously
set up.
Pitch bending
• Turn the jogwheel (07) during playback to change the BPM temporarily.
• Turn the jogwheel (07) clockwise during playback to increase the BPM and counterclockwise to
decrease the BPM. The faster you turn the wheel, the more the BPM changes. The adjustment range
is +/- 20%.
• When you release the jogwheel (07), the track will return to the BPM set with the pitch control
fader (04).
14