DAPAudio CA-4500, Manual

Page: 6 / 24

5
Ordercode: D4515
CA-4500
Description of the device
Features
The CA-4500 is a 4-channel DSP-powered amplifier. It can be easily configured by means of the OLED
display or the PC software. It is equipped with crossovers, a delay, a limiter and an EQ.
●
Input voltage: 210-240V AC, 50/60Hz
● Power consumption: 1100W
● 4CH 2Ohm: Not allowed
● 4CH 4Ohm: 4 x 500W RMS
● 4CH 8Ohm: 4 x 250W RMS
● Bridge 2Ohm: Not allowed
● Bridge 4Ohm: Not allowed
● Bridge 8Ohm: 2 x 1000W RMS
● Frequency response: 20Hz – 20kHz, +0/-1dB
● THD: <0.15%
● S/N rate: >96dB A-weighted
● Crosstalk: >60dB
● Damping factor: >180
● Gain: 34dB
● Input sensitivity: 0,9-1,1V (+/-1dBv)
● Input impedance: 20kOhm balanced, 10kOhm unbalanced
● Output modes: 4-channel, Stereo, Bridge
● Amp technology: Class D
● Power supply: SMPS
● Protection: Clip Limiter, Short circuit, Overheat, Overload, Ultrasonic, DC voltage, Soft start
● Cooling: Forced-air by axial fan
● Airflow: Front to back
● Installation depth: 285 mm (excl. conn.)
● Input connectors: 3-pin XLR IN
● Output connectors: Speakon OUT
● Power connector: IEC
● Fuse: 10A/250V
● Dimensions: 483 x 285 x 44,5 mm (LxWxH)
19” x 1HE
● Weight: 5,9 kg
Overview
Fig. 01