18
Ordercode: D4515
CA-4500
8. Noisegate
In this menu, it is possible to set the noise gate parameters of the 4 output channels (1-4).
01)
Turn the menu control (03) to select the desired output channel (1-4). Press the menu control (03) to
confirm your choice.
02)
Turn the menu control (03) to select one of the 2 options:
●
THRES (noise gate threshold for the selected channel): If an audio signal level is lower than the
preset threshold, the noise gate will block that audio signal.
●
BYPASS: If set to YES, the noise gate is OFF. If set to NO, the noise gate is ON.
03)
Press the menu control (03) to start editing. Turn the menu control (03) to adjust the settings.
04)
Press the menu control (03) to save your settings.
05)
Repeat steps 2-4 to adjust the remaining settings.
06)
Turn the menu control (03) to select EXIT and press the menu control (03) to return to step 1.
07)
Again, turn the menu control (03) to select EXIT and press the menu control (03) to return to main
menu.
9. System
In this menu, it is possible to set the system settings.
01)
Turn the menu control (03) to select one of the 5 options:
●
WORKMODE (NORMAL, CH12 BRI, CH34 BRI, CH12/34 BRI, LINK)
●
PIN (ON, OFF, EDIT)
●
AMP STAT
●
NAME
●
FIRMWARE
02)
Press the menu control (03) to start editing. Turn the menu control (03) to adjust the settings.
03)
Press the menu control (03) to save your settings.
04)
Repeat steps 1-3 to adjust the remaining settings.
05)
Once you have adjusted the settings, turn the menu control (03) to select EXIT and press the menu
control (03) to return to main menu.
Summary of Contents for CA-4500
Page 23: ...22 Ordercode D4515 CA 4500 Dimensions...
Page 24: ...2019 DAP Audio...
