21
Ordercode: D4515
CA-4500
Troubleshooting
CA-4500
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. If the unit operates properly, do not carry out following steps.
01)
If the device does not operate properly, unplug the device.
02)
Check power from the wall, all cables, connections, etc.
03)
Replace the fuse. See page 20 for more information.
04)
If all appears to be O.K., plug the unit in again.
05)
If nothing happens after 30 seconds, unplug the device.
06)
Return the device to your DAP Audio dealer.
Product Specifications
●
Input voltage: 210-240V AC, 50/60Hz
●
Power consumption: 1100W
●
4CH 2Ohm: Not allowed
●
4CH 4Ohm: 4 x 500W RMS
●
4CH 8Ohm: 4 x 250W RMS
●
Bridge 2Ohm: Not allowed
●
Bridge 4Ohm: Not allowed
●
Bridge 8Ohm: 2 x 1000W RMS
●
Frequency response: 20Hz – 20kHz, +0/-1dB
●
THD: <0.15%
●
S/N rate: >96dB A-weighted
●
Crosstalk: >60dB
●
Damping factor: >180
●
Gain: 34dB
●
Input sensitivity: 0,9-1,1V (+/-1dBv)
●
Input impedance: 20kOhm balanced, 10kOhm unbalanced
●
Output modes: 4-channel, Stereo, Bridge
●
Amp technology: Class D
●
Power supply: SMPS
●
Protection: Clip Limiter, Short circuit, Overheat, Overload, Ultrasonic, DC voltage, Soft start
●
Cooling: Forced-air by axial fan
●
Airflow: Front to back
●
Installation depth: 285 mm (excl. conn.)
●
Input connectors: 3-pin XLR IN
●
Output connectors: Speakon OUT
●
Power connector: IEC
●
Fuse: 10A/250V
●
Dimensions: 483 x 285 x 44,5 mm (LxWxH)
19” x 1HE
●
Weight: 5,9 kg
Design and product specifications are subject to change without prior notice.
Summary of Contents for CA-4500
Page 23: ...22 Ordercode D4515 CA 4500 Dimensions...
Page 24: ...2019 DAP Audio...
