R
www.danvex.fi
10
Please carefully review the control functions and make all
necessary
adjustments before using the dehumidifier.
Operation Notices
1.. When moving the machine, do not incline the machine for over 45°
to avo
damaging the
compressor.
2.. Temperature for operation of this machine is
10
-
℃
.
3.. When it is operati
，
the compressor gives off heat when it works
，
and ambient temperature
may rise by 1-3
℃
.Such phenomenon is normal and is safe to use.
4.. When ambient temperature is below
℃
and absolute humidity is relatively low
，
there is no
need to use dehumidifier.
5.. The air inlet and outlet must be away from the wall for at least 10
cm in order not to impair
dehumidification effect.
6.. Working environment shall be as airproof as possible to maximize dehumidification on effec
7.. Dust on the air purification filter mesh may impair its effect or even cause failure. Please cle
regularly for at least once a month. If there is much dust in the environment
，
it must be cleared
once a week or once a day. Pull down the front panel
，
clear the filter mesh. Tap the filter mesh
slightly or eliminate the dust by vacuum cleaner or place the mesh in warm water
（
≤40
℃
and
add appropriate neutral scour
）
and brush and then wash with clear water and dry it.
Direct sunlight or baking shall be avoided to prevent deformation.
Instruction on Code of Failure
This dehumidifier is able to automatically judge failure. If there is any failure,
there will be failure code displayed on the humidity display window.
Failure
Failure Display
E1
E2
E3
E4
E5
Temperature sensor failure
Humidity sensor failure
Phase sequence failure(for 380V power supply devices only)
Water tank full(for the devices equipped water tank only)
High temp./pressure
Low pressure alarm (leakage may happen inside)
E6
