background image

Owner’s Manual — Phoenix Dry Max LGR Dehumidifier

Installation, Operation & Service Instructions

1

www.UsePhoenix.com • [email protected]

Toll-Free 1-800-533-7533

Read and Save These Instructions

 The Phoenix Dry Max LGR Dehumidifier

•  LGR Capacity

 - Removes moisture even in dry 

conditions for deep drying. 

•  Energy Efficiency

 - Removes 80 pints at AHAM while 

drawing only 5.7 amps.

•  Smallest Footprint Large Category Dehumidifier.
•  Slide Out Handle with Recessed Wheels for Easy 

Maneuverability and Compact Storage.

•  Integrated Cord and Hose Management for 

Transportation and Storage.

•  Bright, 4 Line Control Panel

 – Displays the Most 

Common Readings without the Need for Scrolling.

•  Status Light Indicator

 – Tell at a Glance What 

Operating Mode the Unit is in.

•  Integrated, Superior Stacking for Transportation and 

Storage.

•  170 CFM

 - Optimized process air speeds drying and 

provides static pressures for ducting. 

•  Plastic Housing 

- Rugged roto-molded housing resists 

dents and scratches

•  Outlet Ducting

 - 10” lay flat exhaust. 

•  Pleated Media Air Filter

 – MERV 10

•  Lighted cord

 - Easy to determine power to the unit.

Specifications subject to change without notice.

TS-943

06/16

4201 Lien Rd. • Madison, WI 53704

Phoenix Dry Max
Part No. 4036000
Patent Pending

The Phoenix Dry Max is 6% smaller than the closest 

dehumidifier and yet it still has an integrated handle and 

wheels as well as onboard storage for the power cord and 

condensate hose!  The all-new Phoenix Micro-Channel 

condenser allows us to pack so much performance into such a 

small dehumidifier.

The feedback on the stacking of the AirMax was so positive we 

made sure to build it into the Phoenix Dry Max.

We’ve also added a new four line display which provides you 

with all the information you need to take readings directly from 

the home screen.  

A new Status Bar is located at the top of the new control panel 

to give you instant feedback about the dehumidifier from 

across the room.

Remove only four fasteners and you have easy access to 

service the unit.

www.youtube.com/user/usephoenix

Summary of Contents for 4036000












Reviews: