Dantherm CDT 30S MK III, Service Manual

Page: 6 / 36

4
Setup and user guide
Product and function descriptions
Introduction This section provides a product description of the CDT 30S/40S MKIII, plus a description
of its functionality.
How it works Air flow through the dehumidifier:
How the air changes as it passes
through the dehumidifier:
The fan draws humid air through a fil-
ter inside the dehumidifier.

The air is cooled, causing the moisture
content to condense into drops of wa-
ter, which are collected in the water
container.

The air is reheated using heat from the
dehumidifier's operation (temperature
increase of approx. +5 °C), and the
option of further heating using the in-
tegrated heating element.
As the air is repeatedly circulated through the dehumidifier, its moisture content is re-
peatedly reduced, resulting in rapid, gentle drying. The dehumidifier can run constantly,
or be controlled by a built-in hygrostat.
Illustration Illustration of dehumidifier:
Rear view Front view
Continued on next page
Handle
Air intake with PPI
filter behind grille
Air exhaust
Control panel
Water container
Wheel
Power cord
Data socket
remote monitoring
Type plate