Page 3 of 14
1. GENERAL SAFETY & WARNING INSTRUCTIONS
Certain parts of electrical systems are inevitably live or have high operating temperatures.
Observe caution at all times.
Failure to observe these conditions and installation instructions can cause injury and damage.
The system is to be installed and maintained only by trained and qualified personnel.
Do not apply power until all ground connections have been made.
The unit is fitted with pressed and folded metal parts, which could have sheared metal edges. Be
cautious handling the unit, especially when working in poorly accessible places.
Check that no tools, test equipment, torches etc. have been left in or on the equipment on
completion of work.
Ensure the cover(s) and all mounting hardware is firmly secured before leaving installation.
All cable and connectors must conform to UL standards.
The heat exchanger is UL recognized and tested to UL1995. It will comply where necessary with
the safety requirements as defined in UL1995.
2. UNPACKING, HANDLING & INITIAL INSPECTION
The heat exchanger should be inspected on initial delivery and any damage to packaging noted. The
unit should be maintained in the upright position at all times. Special consideration should be given to
correctness of external packing damage or abrasion, loose components and surface marks. Any damage
should be added to the freight bill and immediately notify the freight company for filing a freight
claim. All packaging materials should be retained for inspection.
Do not attempt to operate the unit if it appears to be damaged.
Dantherm
Cooling
, Inc. Heat Exchanger Operating & Maintenance Manual
HexFlow Pinnacle Series Product Information Manual
