Dantel 46034 Installation & Operation Manual Download Page 2

P

AGE

 2

46034-0997 <90-00030>

ORDERING INFORMATION

NOTE:

This section lists the different options available for this product. To order any of the avail-

able options, contact Dantel Inside Sales through our toll-free number, 

1-800-432-6835.

OPTION NUMBER

FEATURES

B11-46034-00

Hubbing Module

GENERAL DESCRIPTION

T

he 46034 Hubbing Module provides nine data ports for

digital data summing, distribution or bridging.

Each port connects through six individual communication buses.

Ports one through eight can accept data through RS-232 and

RS-422 interfaces, depending on the strapping selection. Port

nine operates with an optional on-board communications subas-

sembly. The interface type depends on the selected subassembly.
If handshaking is required with RS-232 communications, the

module can operate up to five RS-232 data ports. One of those

five RS-232 data ports is port nine, operating with a 49029

RS-232 Current Loop Interface Subassembly.
The module comes with a TTL subassembly (bypass card) that

allows port nine to function as a TTL data bus interface in the

absence of a subassembly.
Interface and data connections are set using module switch and

strap options. Ports one through eight operate at a maximum of

38,400 baud. The maximum data rate for port nine depends on

the subassembly installed. Refer to the subassembly documenta-

tion for more information.
The 46034 Hubbing Module is a plug-in printed circuit module

that fits into any Dantel 400-type or similar equipment housing.

The module operates on -21 to -56 VDC input power.

CIRCUIT DESCRIPTION

F

ig. 1 shows the 46034 Hubbing Module functional schematic.

Ports one through eight operate identically. Refer to Tables A

and B for specific pin assignments. Mini-jumpers 1A through 8A

selects port operation of RS-232, RS-422 terminated, or RS-422

unterminated data. Received data is inverted and goes to the

data bus for distribution. The received signal illuminates the

front panel RX LED.

Summary of Contents for 46034



















Reviews: