21
Software Installation
w w w . t e c n a r e . c o m
DAV-4x500 Amplifier | rev.:1.1
DAV-4x500
4.7. Amplifier Status
The amplifier status view allows you to see and set the limiter and impedance as required. When the
limiter is on, the overload lamp will light up.
4.8. Menus
The menu sytem is arranged like so:
4.8.1.
File
1.
New:
When the software is not connected the model of each device can be cre-
ated in this menu.
2.
New Device:
Add analog equipment, which will not affect existing equipment
3. Open:
Open a file from the computer which contains a device management pro
-
ject for the selected device.
4. Save:
Save the current settings for the selected device in the computer.
5. Save As:
Save the current setting for the selected device in the computer under
a new file name.
4.8.2. Device
1.
Device Management:
Vew or modify the software information, device name, and IP ad-
dress of the device.
2.
Channel management:
Set the name of each input and output channel.
3. Channel Copy:
copy the parameters of the same type of channel.
4.8.3.
Connection
1. Connection Port:
Brings up a dialogue to allow set de connection way, port number and
baud rate.
2. Connect the device:
Goes online the selected device and download the device parame-
ters.
3. Disconnect:
Goes ofline the selected device.
4. Connect all:
Goes online all the devices to the network and download the device parameters.
Fig. 23 Amplifier Status
Fig. 24 File Menu
Fig. 25 Device
Menu
Fig. 26
Connection
Menu
Summary of Contents for tecnare DAV-4x500
Page 2: ......
