Dante DN9231-4, Installation And Operation Manual, Page: 7 / 59

DN9231 User's Manual
01A.03 Dante Security Inc. 7
2.2. Hardware Overview
2.2.1. Front Panel
○
○ ○
○
1
System status LEDs
The LEDs are located on the left side of the front panel and they indicate certain system
information.
Status This LED lights up as orange and turns green when the decoder is powered on.
Data This LED lights up when the host system is turned on with a connection is made.
(The color of LEDs is subject to change according to the firmware version)
○ ○ ○ ○
2
Loop out BNC connector
As a loop out connector, connect to a device such as a monitor.
○ ○ ○ ○
3
Output setting switch
This button enables to turn the video output on or off on a monitor. If you set this switch to
Off, no image will be displayed on the monitor. To turn the video output on, set this button to
NTSC or PAL according to the IP device’s video format
before you connect the power cable
.
Note
i
The video output configuration must be set before you connect the power
cable. Changing the setting after the device is turned on will not affect on the
configuration.
Status
Data
Vout
1CH Decoder
NTSC PAL
OFF
○
1
○
2
○
3