DN9231
User's Manual
01A.03
Dante Security Inc.
16
4.2. System Configuration on Web Page
You can set up the system configuration on a web page of your device. Follow the directions
below to use its web page for the system configuration.
1)
Convert a MAC address to an IP address or check the IP address on the IPAminTool.
(The MAC address is attached on the side or bottom of the device.)
2)
Open a web browser and enter the IP address of the device. You also can right click on the
device on the IPAdminTool and select
Web view
.
3)
Enter the default user name (root) and password (pass) and click the
OK
button.
4)
When the Setup page appears, click
System Options
on the left and then select
TCP/IP
from
the drop-down menu.
5)
Input the data for the IP address configuration, and click the
Apply
button on the bottom of
the page. To change the IP address, please make sure to check and have the correct Subnet
mask and Gateway ready. To use DHCP, select
Obtain an IP address via DHCP
.
6)
Set up the necessary system configuration on the web page. Refer to
Chapter 6. How to
Use Web Page
for details.
IPAdminTool automatically searches all activated network encoders and IP cameras and shows
product name, IP address, MAC address, etc. To search your device and use its web page more
easily, use IPAdminTool that is provided with SDK at the following SDK path.
{SDK root}\BIN\TOOLS\AdminTool\
MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177
Convert the Hexadecimal number to Decimal number.