Dannmar D4-9, Installation And Operation Manual

Page: 12 / 85

D4-9 / D4-9X Four-Post Lifts
12
P/N 5900251 — Rev. A1— August 2021
Installation Checklist
Following are the steps needed to install your Lift. Perform them in the order shown.
☐
1. Review the installation safety rules.
☐
2. Make sure you have the necessary tools.
☐
3. Check for clearances around the Lift.
☐
4. About the usable area of the Lift.
☐
5. Select the Lift location.
☐
6. Plan for electrical work.
☐
7. Unload and unpack the Lift components.
☐
8. Choose the Power Post location.
☐
9. Understand the orientation issues.
☐
10. Create Chalk Line guides.
☐
11. Move the Posts into position.
☐
12. Install the Crosstubes.
☐
13. Raise the Crosstubes.
☐
14. Install the Runways.
☐
15. Learn about Safety Locks.
☐
16. Install the Safety Lock Release Mechanism.
☐
17. Learn about the Pivot Pieces
☐
18. Install the Top Caps.
☐
19. About Cables Sheaves.
☐
20. Lubricate the Cable Sheaves
☐
21. Route the Lifting Cables.
☐
22. Install the Power Unit.
☐
23. Install the Flex Tube.
☐
24. Learn about Hydraulic Fluid Contamination and Liquid Thread Sealant.
☐
25. Install the Flex Tube.
☐
26. Install the Hydraulic Hoses.
☐
27. Install the Return Line.
☐
28. About Compression Fittings and Tubing.
☐
29. Contact the Electrician.
☐
30. Connect to a power source (
Electrician required for 220 VAC operation
).
☐
31. Install the Power Disconnect Switch and Thermal Disconnect Switch (
Electrician required
).
☐
32. Add Hydraulic Fluid to the Power Unit reservoir.
☐
33. About Embedment.
☐
34. Anchor the Posts.
☐
35. Perform final leveling.
☐
36. Install the accessories.
☐
37. Perform an operational test.
☐
38. Review the final checklist.