Danmeter CSM 2, User Manual

Page: 13 / 39

Cerebral State Monitor - CSM DFU Page 9
4.6
Setup Menu
General menu structure and menu selections
Top Menu
BS% 0 47 CSI
Menu 1
Alarm
Config
Device information
How to select menu settings from Display Mode
1. Remove battery lid.
2. From any Display Mode, press any arrow on the Control key (9).
3. The top menu appears.
4.
Note: The last menu used is chosen.
How to set parameter values
1. Press the Control key (9a) to select menu.
2. Press the Control key (9b) to enter submenu.
3. Press the Control key (9a) to select parameter.
4. Press the Control key (9b) to highlight parameter value.
5. Press the Control key (9a) to select parameter value.
6. Press the Control key (9b) to accept setting or (9c) to cancel the selection and return
without any change.
7. Press the Control key (9c) to go back in one menu level steps.
If the Control key has not been activated in 20 sec. the CSM returns to Operation Display Mode and
stores the settings.
Note:
The change of settings will only be stored for future use after returning to Operation
Display Modes.