P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 2 5
A(mm)
760
B(mm)
50mm mini
C(mm)
20mm mini
D(mm)
Air intake
E(mm)
Air exit 5mm
Under any circumstances, make sure the
Induction cooker hob is well ventilated and
the air inlet and outlet are not blocked.
Ensure the induction cooker hob is in good
work state. As shown below.
Note:
The safety distance between the
hotplate and the cupboard above the
hotplate should be at least 760mm.
WARNING:
•
There are ventilation holes around outside of the hob. YOU MUST ensure these
holes are not blocked by the worktop when you put the hob into position.
•
Be aware that the glue that join the plastic or wooden material to the furniture,
has to resist to temperature not below 150°, to avoid the unstuck of the paneling.
•
The rear wall, adjacent and surrounding surfaces must therefore be able to
withstand an temperature of 90°.
WARNING: Ensuring Adequate Ventilation
Make sure the induction cooker hob is well ventilated
and that air inlet and outlet are not blocked. In order to
avoid accidental touch with the overheating bottom of
the hob, or getting unexpectable electric shock during
working, it is necessary to put a wooden insert, fixed
by screws, at a minimum distance of 50mm from the
bottom of the hob. Follow the requirements below.
