P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 2 0
CARE AND CLEANING
WHAT?
HOW?
IMPORTANT!
Everyday
soiling on glass
(fingerprints,
marks, stains left
by food or non-
sugary spillovers
on the glass)
1. Switch the power to the cooktop off.
2. Apply a cooktop cleaner while the glass is still
warm (but not hot!)
3. Rinse and wipe dry with a clean cloth
or paper towel.
4. Switch the power to the cooktop
back on.
• When the power to the cooktop is
switched off, there will be no ‘hot surface’
indication but the cooking zone may still
be hot! Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become stained.
Boilovers, melts,
and hot sugary
spills on the
glass
Remove these immediately with a fish slice,
palette knife or razor blade scraper suitable
for ceramic glass cooktops, but beware of hot
cooking zone surfaces:
1. Switch the power to the cooktop off
at the wall.
2. Hold the blade or utensil at a 30° angle and
scrape the soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up with a dish
cloth or paper towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on glass’ above.
• Remove stains left by melts and sugary
food or spillovers as soon as possible.
If left to cool on the glass, they may be
difficult to remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover is
retracted, the blade in a scraper is razor-
sharp. Use with extreme care and always
store safely and out of reach
of children.
Spillovers on the
touch controls
1. Switch the power to the cooktop off.
2. Soak up the spill.
3. Wipe the touch control area with a clean
damp sponge or cloth.
4. Wipe the area completely dry with a paper
towel.
5. Switch the power to the cooktop back on.
• The cooktop may beep and turn itself off,
and the touch controls may not function
while there is liquid on them. Make sure
you wipe the touch control area dry
before turning the cooktop back on.
