background image

 I

 

 02 9604 1226    E 

 

I

 

 

[email protected]    W

 

 |

 

 danielaappliances.com.au

PA G E   5

CHILD SAFETY

• 

We strongly recommend that babies and young children are prevented from being near 

the appliance and not allowed to touch the appliance 

at any time

. During and after use, 

all surfaces will be hot.

DURING USE

• 

Any film or stickers that are present on the hob surface when it is delivered should be 

removed before use.

• 

Care should be used when utilising the appliance, otherwise there is a risk of burns being 

caused.

• 

You should not allow the electrical connection cables to come into contact with the hob 

surface when it is hot or any hot cookware.

• 

If fat and oil overheats, then it can ignite extremely quickly. For this reason, when cooking 

with fat and oil the appliance should not be left unattended.

• 

Make sure that all of the cooking zones are switched off after use.

CLEANING

• 

Cleaning of the hob should be carried out on a regular basis.

• 

IMPORTANT: 

Before attempting to clean the appliance, it should be disconnected from 

the mains and cool.

• 

Great care should be taken whilst using this appliance and when following the 

cleaning procedure.

• 

You should not use a steam jet or any other high pressure cleaning equipment to 

clean the appliance.

Summary of Contents for DAN2GAG





























Reviews: