Danfoss VLT, Pocket Manual, Page: 54 / 64

54 VLT ® Soft Starter Pocket Guide
This requires an MCD Profi bus Module which clips onto the side of the
MCD200 (Cat. No: 175G9001).
Notes:
A single Profi bus Module is required for each MCD200. •
Profi bus node address is selected using two rotary switches. •
Data rate is automatically detected.
Up to 31 Profi bus Modules can be used as Profi bus slaves
•
on a single Profi bus DP network.
The Profi bus Module requires and external 24 VDC auxiliary supply.
•
The MCD Profi bus Module is Profi bus tested and certifi ed. •
For more information on the MCD Profi bus Module, refer to the •
Installation Instructions (MG.17.Gx.02) at www.danfoss.com/drives.
MCD200
MCD
Profibus
Module
Standard
DB9
connection
Profibus DP
network cable
Cat. No: 175G9001
MCD200 Profi bus option