Danfoss VLT, Pocket Manual, Page: 46 / 64

46 VLT ® Soft Starter Pocket Guide
MCD Remote Operator
RS485
Starter
RS485
Network
B3
B2
B1
-
+
B8
B7
B6
-
+
GND GND
68
61
69
-
+
GND
MCD3000
Cat. No: 175G3061
This is achieved using the MCD Remote Operator
(Cat. No: 175G3061).
Notes
A single Remote Operator is required for each MCD3000 •
If two Remote Operators are required, the RS485 Network side of the •
fi rst Remote Operator (terminals B6, B7, B8) must be connected to the
RS485 starter side of the second Remote operator
(terminals B1, B2, B3)
The Remote Operator requires an external 18-30 VAC/DC auxiliary
•
supply.
For more information on the MCD Remote Operator, refer to the Users
•
Manual (MG.17.Ex.02) located at www.danfoss.com/drives
MCD3000 with MCD Remote Operator Option