1 Introduction
1.1 Purpose of the Manual
This installation guide provides information for quick instal-
lation of a VLT
®
PROFIBUS DP MCA 101 in the VLT
®
frequency converter.
The installation guide is intended for use by qualified
personnel. Users are assumed to know the VLT
®
frequency
converter, with PROFIBUS technology, and with the PC or
PLC used as a master in the system.
Read the instructions before installation and ensure that
instructions for safe installation are observed.
VLT
®
is a registered trademark.
1.2 Additional Resources
Resources available for the frequency converters and
optional equipment:
•
The
VLT
®
Operating Instructions
provide the
necessary information for getting the frequency
converter up and running.
•
The
VLT
®
Design Guide
provides detailed
information about capabilities and functionality
to design motor control systems.
•
The
VLT
®
Programming Guide
provides greater
detail on working with parameters and many
application examples.
•
The
VLT
®
PROFIBUS DP MCA 101 Installation Guide
provides information about installing the
PROFIBUS and troubleshooting.
•
The
VLT
®
PROFIBUS DP MCA 101 Programming
Guide
provides information about configuring the
system, controlling the frequency converter,
parameter access, programming, troubleshooting,
and some typical application examples.
Supplementary publications and manuals are available
from Danfoss. See
vlt-drives.danfoss.com/Support/Technical-
Documentation/
for listings.
1.3 Product Overview
1.3.1 Intended Use
This installation guide relates to PROFIBUS interface
ordering numbers 130B1100 and 130B1200.
The PROFIBUS interface enables communication between a
VLT
®
frequency converter and any master complying with
the PROFIBUS standard. Communication can be configured
via MCT 10 Set-up Software. The PROFIBUS interface
supports PROFIBUS DP-V1.
VLT
®
PROFIBUS DP MCA 101 is intended for use with:
•
VLT
®
HVAC Drive FC 102.
•
VLT
®
Refrigeration Drive FC 103.
•
VLT
®
AQUA Drive FC 202.
•
VLT
®
AutomationDrive FC 301/FC 302.
•
VLT
®
DriveMotor FCP 106.
•
VLT
®
DriveMotor FCM 106.
Requirements to the master:
A PLC or PC that:
•
Has a serial communication card with PROFIBUS
master class 1 capability.
•
Supports all PROFIBUS communication services
required by the application.
•
Fulfils requirements of the PROFIBUS standard.
•
Fulfils requirements of the PROFIBUS frequency
converter profile and its company-specific
implementation, PROFIdrive.
•
Fulfils requirements of the relevant VLT
®
frequency converter.
1.3.2 Items Supplied
When the fieldbus option is not factory-mounted, the
following items are supplied:
•
Fieldbus option and connector.
•
LCP cradle.
•
Front covers (in various sizes).
•
Stickers.
•
Accessories bag (including EMC bracket).
•
Installation Guide.
1.4 Approvals and Certifications
More approvals and certifications are available. For more
information, contact a local Danfoss partner.
Introduction
VLT
®
PROFIBUS DP MCA 101
2
Danfoss A/S © 07/2015 All rights reserved.
MG33C602
1
1
