![background image](http://html1.mh-extra.com/html/danfoss/vlt-hvac-drive-fc-131/vlt-hvac-drive-fc-131_operating-manual_3853266023.webp)
•
•
•
•
4 Programming
4.1 Local Control Panel (LCP)
The LCP is divided into 4 functional sections.
A. Display
B. Menu key
C. Navigation keys and indicator lights
D. Operation keys and indicator lights
e3
0b
u8
20
.1
0
B
C
D
A
13
14
15
12
11
11
5
4
10
6
7
8
9
1
2
11
1 (2)
3
Illustration 15: Local Control Panel (LCP 32)
A. Display
The graphical LCD-display is illuminated with clear white backlight and can show either 3 full lines (in programming mode) or 2 full
& 2 ½ lines (in status mode). The following table describes the information that can be read from the display.
Table 8: Legend to Section A, Illustration 3
1 Parameter number and name.
2 Parameter value.
3 Setup number shows the active setup and the edit setup (only in Status menu). The number outside brackets is active setup,
and the number inside brackets is edit setup. For example, 1(2) means 1 is the active setup, and 2 is the edit setup.
4 Motor direction is shown to the bottom left of the display – indicated by a small arrow pointing either clockwise or counter-
clockwise.
5 The triangle indicates if the LCP is in Status, Quick Menu, or Main Menu.
B. Menu key
Press [Menu] to select among Status, Quick Menu, or Main Menu.
AQ367426199594en-000101 / 130R0988 | 23
Danfoss A/S © 2021.06
Programming
VLT® HVAC Drive FC 131
Operating Guide