24-02 Emergency Mode Unit
Option:
Function:
[11]
RPM
[12]
Pulse/s
[20]
l/s
[21]
l/min
[22]
l/h
[23]
m³/s
[24]
m³/min
[25]
m³/h
[30]
kg/s
[31]
kg/min
[32]
kg/h
[33]
t/min
[34]
t/h
[40]
m/s
[41]
m/min
[45]
m
[60]
°C
[70]
mbar
[71]
bar
[72]
Pa
[73]
kPa
[74]
m WG
[75]
mm Hg
[80]
kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125] ft³/s
[126] ft³/min
[127] ft³/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in²
[172] in WG
[173] ft WG
[174] in Hg
[180] HP
24-03 Emergency Mode Min Reference
Range:
Function:
Size
related
*
[ -999999.999
- par. 24-04
FireModeUnit]
Minimum value for the reference/
setpoint (limiting the sum of value in
parameter 24-05 Emergency Mode
Preset Reference
and value of signal on
input selected in
parameter 24-06 Emergency Mode
Reference Source
).
If running in open loop when
emergency mode is active, the unit is
selected by the setting of
parameter 0-02 Motor Speed Unit
. For
closed loop, select the unit in
parameter 24-02 Emergency Mode Unit
.
24-04 Emergency Mode Max Reference
Range:
Function:
Size
related
*
[ par. 24-03
- 999999.999
FireMo-
deUnit]
Maximum value for the reference/
setpoint (limiting the sum of value in
parameter 24-05 Emergency Mode Preset
Reference
and value of signal on input
selected in
If running in open loop when
emergency mode is active, the unit is
selected by the setting of
parameter 0-02 Motor Speed Unit
. For
closed loop, select the unit in
parameter 24-02 Emergency Mode Unit
24-05 Emergency Mode Preset Reference
Range:
Function:
0 %
*
[-100 -
100 %]
Enter the required preset reference/setpoint as a
percentage of the value in
parameter 24-04 Emergency Mode Max Reference
.
The set value is added to the value represented
by the signal on the analog input selected in
parameter 24-06 Emergency Mode Reference
Source
.
Parameter Description
VLT
®
AQUA Drive FC 202
204
Danfoss A/S © 05/2018 All rights reserved.
MG20OB02
3
3
Summary of Contents for VLT AQUA Drive FC 202
Page 2: ......
