Danfoss VLT AQUA Drive FC 202, Programming Manual

Page: 29 / 294

3.2 Parameters 0-** Operation and Display
Parameters related to the basic functions of the frequency
converter, function of the LCP keys, and configuration of
the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display.
The frequency converter is delivered with
2 different language packages. English and
German are included in both packages.
English cannot be erased or manipulated.
[0]
*
English Part of language packages 1–2.
[1] Deutsch Part of language packages 1–2.
[2] Francais Part of language package 1.
[3] Dansk Part of language package 1.
[4] Spanish Part of language package 1.
[5] Italiano Part of language package 1.
[6] Svenska Part of language package 1.
[7] Nederlands Part of language package 1.
[10] Chinese Part of language package 2.
[20] Suomi Part of language package 1.
[22] English US Part of language package 1.
[27] Greek Part of language package 1.
[28] Bras.port Part of language package 1.
[36] Slovenian Part of language package 1.
[39] Korean Part of language package 2.
[40] Japanese Part of language package 2.
[41] Turkish Part of language package 1.
[42] Trad.Chinese Part of language package 2.
[43] Bulgarian Part of language package 1.
[44] Srpski Part of language package 1.
[45] Romanian Part of language package 1.
[46] Magyar Part of language package 1.
[47] Czech Part of language package 1.
[48] Polski Part of language package 1.
[49] Russian Part of language package 1.
[50] Thai Part of language package 2.
[51] Bahasa
Indonesia
Part of language package 2.
[52] Hrvatski Part of language package 2.
0-02 Motor Speed Unit
Option: Function:
NOTICE
This parameter cannot be adjusted while the
motor is running.
The information shown in the display depends on the
settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings . The default settings
of parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings depend on to which
region of the world the frequency converter is
supplied.
NOTICE
Changing the motor speed unit resets certain
parameters to their initial value. Select the
motor speed unit before modifying other
parameters.
[0]
*
RPM Select to show motor speed variables and parameters
using motor speed (RPM).
[1] Hz Select to show motor speed variables and parameters
using output frequency (Hz).
0-03 Regional Settings
Option: Function:
NOTICE
This parameter cannot be adjusted while
the motor is running.
The display output depends on the settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings . The default
settings of parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings depend on which
region of the world the frequency converter is
supplied to. Reprogram the settings as required.
The settings not used are made invisible.
[0] Interna-
tional
Sets parameter 1-20 Motor Power [kW] units to
[kW] and the default value of
parameter 1-23 Motor Frequency to 50 Hz.
[1] North
America
Sets parameter 1-21 Motor Power [HP] units to [hp]
and the default value of parameter 1-23 Motor
Frequency to 60 Hz.
Parameter Description Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 27
3 3