8.2.6 AC Capacitors
1
130BX436.10
2
3
4
Figure 8.4 AC Capacitors
1
AC capacitor
3
AC capacitor mounting bracket
2
AC capacitor retaining nut
4
AC capacitor mounting bracket retaining nut
Table 8.4
1.
Remove the control assembly support bracket in
accordance with the procedure.
2.
Remove the power card mounting plate in
accordance with the procedure.
3.
Remove the nut (0.43 in [11 mm]) from each side
of the AC capacitor and the lug wires.
4.
Remove the AC capacitor by removing the nut
(0.32 in [8 mm]) from each side of the AC
capacitor mounting bracket.
Note that removing the top most capacitor may require
removing the center capacitor for ease of access.
Reinstall in the reverse order of this procedure. See
for torque tightening values.
E-Frame Sizes Disassembly a...
VLT Advanced Active Filter AAF006 D and E Frames Service Manual
8-6
MG90Z122 - VLT
®
is a registered Danfoss trademark
8
8
