VLT® 7000 Booster
Pa
[17]
kPa
[18]
mVS
[19]
PSI
[36]
lb/in
2
[37]
Function:
Selection of unit to be shown on the display.
This unit will be used if
Reference [unit
] [2] or
Feedback
[unit
] [3] has been selected in one of the parameters
007-010, as well as in the
Display mode
.
In
Closed loop
, the unit is also used as a unit for
Minimum/ Maximum reference and
Minimum/Maximum
feedback
, as well as
Setpoint 1
and
Setpoint 2
.
Description of choice:
Select the required unit for the reference/feed-
back signal.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.70.A1.02 - VLT is a registered Danfoss trademark
80
