7,5 kW (7.50 KW)
[750]
11 kW (11.00 KW)
[1100]
15 kW (15.00 KW)
[1500]
18.5 kW (18.50 KW)
[1850]
22 kW (22.00 KW)
[2200]
30 kW] (30.00 KW)
[3000]
37 kW (37.00 KW)
[3700]
45 kW (45.00 KW)
[4500]
55 kW (55.00 KW)
[5500]
75 kW (75.00 KW)
[7500]
90 kW (90.00 KW)
[9000]
110 kW] (110.00 KW)
[11000]
132 kW (132.00 KW)
[13200]
160 kW (160.00 KW)
[16000]
200 kW (200.00 KW)
[20000]
250 kW (250.00 KW)
[25000]
300 kW (300.00 KW)
[30000]
315 kW (315.00 KW)
[31500]
355 kW (355.00 KW)
[35500]
400 kW (400.00 KW)
[40000]
450 kW (450.00 KW)
[45000]
500 kW (500.00 KW)
[50000]
550 kW (550.00 KW)
[55000]
Depends on the unit
Function:
This is where to select the kW value P
M,N
that corre-
sponds to the rated power of the motor. At the works,
a rated kW value P
M,N
has been selected that depends
on the type of unit.
Description of choice:
Select a value that equals the nameplate data on the
motor. There are 4 possible undersizes or 1 oversize
in comparison with the factory setting. Also, alterna-
tively it is possible to set the value for motor power as
an infinitely variable value, see the procedure for
In-
finitely variable change of numeric data value
.
103
Motor voltage, U
M,N
(MOTOR VOLTAGE)
Value:
200 V
[200]
208 V
[208]
220 V
[220]
230 V
[230]
240 V
[240]
380 V
[380]
400 V
[400]
415 V
[415]
440 V
[440]
460 V
[460]
480 V
[480]
500 V
[500]
550 V
[550]
575 V
[575]
600 V
[600]
Depends on the unit
Function:
This is where the rated motor voltage U
M,N
is set for
either star Y or delta
∆
.
Description of choice:
Select a value that equals the nameplate data on the
motor, regardless of the mains voltage of the frequen-
cy converter. Furthermore, alternatively it is possible
to set the value of the motor voltage infinitely varia-
bly. Also refer to the procedure for
infinitely variable
change of numeric data value
.
NB!
Changing parameters 102, 103 or 104 will
automatically reset parameters 105 and
106 to default values. If changes are made
to parameters 102, 103 or 104, go back
and reset parameters 105 and 106 to cor-
rect values.
104
Motor frequency, f
M,N
(MOTOR FREQUENCY)
Value:
50 Hz (50 Hz)
[50]
60 Hz (60 Hz)
[60]
Function:
This is where the rated motor frequency f
M,N
is selec-
ted.
Description of choice:
Select a value that equals the nameplate data on the
motor. Furthermore, it is also possible to set the value
VLT
®
6000 HVAC Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
108
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark
