8
Display preferences
Temperature display (°C or °F)
Press and hold
DAY & COPY
(for 2-3
seconds) until display changes.
Clock display (12 or 24 hr)
Press and hold
NEXT & DAY
(for 2-3
seconds) until display changes
(AM or PM will appear in 12 hr mode)
Setting the Clock & Day
Press
PROG
to begin programming
DAY
- Press
DAY
until correct day is
shown (1=Monday, 2=Tuesday etc)
TIME
- Press
+ and -
to change time
(press and hold to change in 10 min
increments)
This display will ONLY appear if the OSC
function has been enabled by your installer.
Use the
+ or - buttons
to select the
OSC period. The choices are 0:30 (30
mins), 1:00 (1 hr), 1:30 and 2:00.
The recommended setting is 0:30. If set
to 0:00 the function is disabled.
To
change
DAY
To change TIME
GB - User Instructions
Setting the OSC Period,
if enabled (see pg.5)
Accepting the preset programmes
If you are happy to use the preset programmes on page 7,
you don’t need to do anything else. To accept these settings
just close the front cover and after 2 minutes the pre-settings
will automatically be accepted.