9
GB - User Instructions
The unit is now in
RUN mode
(colon
fl ashes in display) and the heating
will operate according to the preset
programmes.
a) Press
PROG
until Event 1
fl ashes, then press
DAY
to move from
current day to Day 1.
b) Amend the time and temperature
as follows:
i)
Use
+ and –
buttons to
alter time (press and hold to
change in 10 min increments).
ii)
Use
and
buttons to alter
temperature in 0.5°C (1°F) steps.
iii) Press
NEXT
to advance to
next Event
iv)
Repeat steps i,ii & iii above for
Events 2, 3, 4, 5 & 6
Programming in 7-day mode
(separate programmes for each day of the week)
1
Before you change the preset programmes
Your installer will have set your unit to operate in either
7-day
mode
or
5/2 day mode
. To tell which mode your unit is set
press
PROG
until Event 1 fl ashes in the display.
This unit is in
7-day
mode and you can
programme different settings for each day of the
week
(see page 9-10
).
This unit is in
5/2 day
mode and you can enter
one of set of programmes for weekdays and
another set for weekends (
see page 10
).
1
1 2 3 4 5
