4
VQ.MP.C1.02
Produced by Danfoss A/S © 12/2018
DTA
LPU
SFV
FI
29
23
2
G
2
25
N
1
G
R
Q
P
3
D
37
Z4
M
Q
HEL
5
4
Z1
Notice!
Do not use pipe wrench pliers;
for one thing, the nuts will be damaged
and there is also the danger of excessive
tightening, which can destroy the gasket.
EPDM gaskets do not require a high torque
to ensure tightness (~ 10 .. max. 35 Nm).
See also chapter 5.1 in the installation and
operating instructions It is best to manually
tighten all screw connections and correct
when filling the system only until the
respective connection no longer leaks.
It is best to tighten all screw connections
only by hand and correct when filling
the system only until the respective
connection no longer leaks. Finally,
mount the heat insulation of the heat
exchanger according to the separate
installation instructions of the device.
Quick Guide
ThermoDual®-GS
VQMPC102_ThermoDual-GS_181220.indd 4
20.12.2018 08:55:41