Installation Guide
Termix VMTD Compact 20
4.0 Mounting
4.1 Mounting
Installation must be in compliance with local standards and
regulations.
District heating (DH) - In the following sections, DH refers to the
heat source which supplies the substations. A variety of energy
sources, such as oil, gas or solar power, could be used as the
primary supply to Danfoss substations. For the sake of simplicity,
DH can be taken to mean the primary supply.
Connections:
1. District heating (DH) supply
2. District heating (DH) return
3. Heating (HE) supply
4. Heating (HE) return
5. Domestic hot water (DHW)
6. Domestic cold water (DCW)
7. Hot water circulation (HWC)
Connection sizes:
DH + HE:
G 1” (int. thread)
DCW + DHW:
G 1” (int. thread)
HWC:
G ¾” (int. thread)
Dimensions (mm):
Without cover:
H 815x W 505 x D 300
With cover:
H 815 x W 540 x D 360
Weight (approx.):
30–40 kg
Authorized personnel only
Assembly, start-up and maintenance work must be performed by
qualified and authorized personnel only.
The pipe placement can deviate from the shown drawing. Please note
the markings on the station.
Danfoss Heating
VI.CW.W2.02 / LUK41200
DEN-GT
5
Summary of Contents for Termix VMTD Compact 20
Page 2: ...Installation Guide Termix VMTD Compact 20 2 DEN GT VI CW W2 02 LUK41200 Danfoss Heating...
Page 21: ...Installation Guide Termix VMTD Compact 20 Danfoss Heating VI CW W2 02 LUK41200 DEN GT 21...
Page 22: ...Installation Guide Termix VMTD Compact 20 22 DEN GT VI CW W2 02 LUK41200 Danfoss Heating...
Page 24: ...Installation Guide Termix VMTD Compact 20 Produced by Danfoss A S 01 2012...
