Danfoss Termix VMTD Compact 20, Installation Manual

Page: 23 / 24

Installation Guide Termix VMTD Compact 20
8.0 Declaration
8.1 Declaration of conformity
Declaration of compliance
We:
Gemina Termix A/S
Member of the Danfoss Group
Navervej 15-17
DK-7451 Sunds
do hereby on our own responsibility declare that the following products:
Termix Substations
covered by this declaration is in conformity with the following directive(s),
standard(s) or other normative document(s),
provided that the products are used in accordance with our instructions.
EU Directives:
Machinery Directive 2006/42/EEC
EN ISO 14121-1 Safety of machinery - Risk assessment
EN 60204-1-Safety of machinery - Electrical equipment of machines
EMC Direct ive 2004/108/EEC
EN 61000-6-2 2007 Electromagnetic compatibility
- Generic standard: Immunity industry
EN 61000-6-3 2007 Electromagnetic compatibility
- Generic standard: Emission for residential, commercial and light industry
PED Directive 97/23/EEC
All substations that falls under Article 3.3 and category 1 shall not be CE-marked
according to this directive, however all essential safety requirements from the
PED Directive 97/23/EEC are followed to ensure hydraulic safety
This declaration is immediately annulled, if the product is interfered with in any way,
which interferes with the above mentioned directives and standards,
without the written consent from Gemina Termix A/S.
2010.01.05 — Sunds
Time and place
Lars Ginnerup
Responsible for quality
Danfoss Heating
VI.CW.W2.02 / LUK41200 DEN-GT 23