![background image](http://html1.mh-extra.com/html/danfoss/sonoselect/sonoselect_installation-manual_3500081011.webp)
VU.IG.B9.02
© Danfoss | Energy Meters | 2019.03 | 11
Installation guide
SonoSelect and SonoSafe
2.8 Installation of module/cable
1. Before handling module PCB
ensure relevant ESD regulations
are observed (IEC 61340-5-1).
2. Break wired seal for enclosure.
3. Cut rubber parallel to
enclosure.
Click!
4. Insert module following
guide on PCBA cover.
Insert cable through hole,
connect cable and fix to screw
terminals matching colour and
terminal numbers.
Fix cable(s) to cable relief. Outer
jacket no longer than 9 mm from
cable relief (line). Press down.
5. Close enclosure making
sure that no cables interfere
with rubber sealing and other
internal parts.
6. Reset tamper alarm via Sono-
App for SonoSelect 10.
For module configuration, see
SonoApp user guide.