Danfoss Heating
13
GB
Please see overleaf for a table containing replacement wiring
information.
Some time controls are connected in diff erent ways depending upon
the type of system and/or the controls which are fi tted. Consult
the column headed “
NOTE: The conversion applies only if....
”
to determine how the SET3M programmer’s GRAVITY or PUMPED
link should be set. If there is any doubt about the way in which the
existing programmer is connected, please contact our Technical
Services Department before proceeding with replacement.
Note: The SET3M is a direct plug-in replacement for any
existing programmers using the British Gas Standard Wallplate.
This includes the Horstmann 425 Tiara and Diadem electro-
mechanical and 525 & 527 electronic programmers.
4.0 Replacement
