CS100 is equipped with: 1x Main connector (CAN Bus, I/O, Power).
Main connector
The connector functions:
•
Connecting the device to the CAN bus network
•
Supplying the device with power
•
Local multifunction Inputs/Outputs
To avoid damage to the device, connect/disconnect the main connector only if the power supply to the
device is switched off.
To maximize the performance of the GPS receiver, mount the GPS antenna in a place where it is level with
the local geographic horizon and has full view of the sky above.
8-pin DEUTSCH CAN/power supply/local MFIO
The table and drawing below show the pin assignment and conductor colors of the connector. The colors
stated in the table below are the conductor colors of the cable listed.
Power supply/ CAN bus/ I/O connector
Pin
Designation
Color
Description
1
Ground
Black
Power Supply
2
9 to 36 Vdc
Red
Power Supply
3
CAN 1 high
Yellow
CAN bus 1
4
CAN 1 low
Green
CAN bus 1
5
MFIO1/CL15
Brown
Multifunction IO/Ignition
6
MFIO2
Orange
Multifunction IO
7
CAN 2 high
Yellow/White
CAN bus 2
8
CAN 2 low
Green/White
CAN bus 2
Technical Information
PLUS+1 Connect CS100 IoT Gateway — Professional Install Only
Connector
16 |
©
Danfoss | October 2020
BC299456869228en-000101
