background image

In this chapter, you will find important information on how to avoid life-threatening situations and
injuries and how to prevent product damage.

General information

These instructions are part of the device.

They contain text and illustrations for the correct handling of the module and must be read before
installation or use.

Before deploying the device described in this document, read the entire Technical Information and the
User Manual document, including all safety information.

Non-observance of the notes, operation that is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of people and plant.

Keep this manual for future use and make all information available to anyone deploying the device, even
after installation.

Tampering with the device can lead to considerable risks for the safety of people and plant. It is not
permitted and leads to an exclusion of any liability and warranty claims.

The device must be installed, connected and put into operation by a qualified electrician.

In the event of malfunctions or uncertainties, please contact the manufacturer.

This device is designed to be used in systems which must be checked for conformity with legal
requirements prior to placing into operation. The integrator of this device is responsible to check and
comply with regional directives and requirements.

W

Warning

Danfoss strongly recommends that initialization and provisioning of CS100 IoT Gateways be completed

outside of machine production processes. It is best practice to de-couple this initialization and

provisioning from machine production processes.

Safety advice

General

Danger due to possibly deficient data transmission.

CS100 unit operates using radio signals and cellular networks and is not authorized for use in safety-
related applications.

Deficient network coverage, failure or malfunction of the device may lead to deficient data transmission.
Because of this, connection cannot be guaranteed at all times under all conditions.

Do not operate the device in machines and applications where life depends on the proper operation
of this piece of equipment.

Never rely solely upon any wireless device for essential communications.

Health care

Danger of interference caused by RF energy.

Medical equipment may be sensitive to RF energy.

Technical Information

PLUS+1 Connect CS100 IoT Gateway — Professional Install Only

Safety information

 

10 | 

©

 Danfoss | October 2020

BC299456869228en-000101

Summary of Contents for PLUS+1 Connect CS100

























Reviews: